|
|
|
|
|
|
|
|
This
Season's discounted prices and qualifications are
posted below. All prices are included Field
Measurement & Templating, Fabrication, and
Installation. Sales prices based on 40 SF and up.
Less then 40 SF projects; subject to additional 5%
on SF prices. While e-mailing or faxing your project
you should provide the job site address, contact
person’s name and phone number, and desired dates
for template and installation. All posted prices
valid thru 12/31/2006.
· Lead Times
After ordering our project turnaround time (from
template to installation) is one of the shortest in
the industry and in most cases ranges from 3 to 5
days.
· Job site is ready for template when:
All necessary appliances including cooktop, down
draft, stove, sinks, faucets, soap dispenser, hot
water call, or any other pertinent items on site.
Any item that requires a cut into the stone will be
taken at the time of template (except cooktop, only
specifications will be required) and returned at the
time of installation.
· Template:
The home owner or (designated decision-maker over
the age of 18) MUST be present during the entire
template process. This person will have to answer
questions in regards to seaming, corner radius,
overhangs and “special designs” on island, etc;
therefore it is recommend that this person is
familiar with the project.
· Pricing:
We have priced your order based on measurements that
you have provided. If field measurements are
otherwise, we will adjust accordingly.
·
Removal of old tops:
Installation of natural stone or quartz surfaces
does not include removal of old tops unless
agreements have been made for us to do so. If we are
installing your new top in an existing kitchen,
there may be unfinished areas of your wall or
cabinets that will be exposed and / or covered by
your new top. We DO NOT finish these areas.
· Plumbing and Wiring:
These are not included in any installation. We are
not plumbers or electricians. We will disconnect
your sink when removing old tops, but we are NOT
responsible for any leaks or damage. We will NOT
reconnect sinks or cooktops. Under-mount
applications will be cutout, polished and drilled to
accept mounting brackets. Cutouts for drop in sinks
and cooktops will be completed on the job site and
dusting is to be expected.
· Installation:
The home owner or (designated decision-maker over
the age of 18) MUST be present during the entire
installation process.
·
Incidental Damage:
Final wall preparation (painting, wallpaper, etc)
should NOT be completed prior to installation if at
all possible. Care will be exercised during the
countertop installation; however scrapes, punctures
or digs are possible. These items are considered
incidental damages and are customer’s responsibility
to repair.
· Seaming:
Placement of seams is the discretion of the
fabricator, seams will typically vary from 1/16” to
1/8” and will be visible to the eye or touch. Color
coordinated epoxy will be used to form the seam and
blend in with countertop. Even though a customer is
consulted with regards to the seam location, the
fabricator reserves the right to adjust if needed.
· Installation
Approval:
After the product has been installed the customer or
(designated decision-maker over the age of 18) MUST
be present to inspect the countertops. At
installation a customer approval form will be
provided, which will be asked to sign, confirming
the satisfaction with the quality, fit and damage
free condition of countertop.
|
|
|
|
|
|
|
|
click to zoom
s>
|
|
|
ANIT Marble and Granite. | 7707 Lafayette Forest Drive #14, Annandale, VA 22003 | Office: 301-324-1845 Fax
202-787-3891 |
info@imgmd.com
Copyright
©
2011 | All Rights Reserved
|
|
